Vulcan Hart VGLT40 Gas Tilt Kettles Floor Mounted 2/3 Jacketed Stationary, 100,000 BTU/hr., 40 gallon capacity; Faucet bracket 90" left of draw-off valve; 3/4" rear gas connection with gas pressure regulator; Perforated strainer; Self generating gas fired power burner, all welded type 316 stainless steel, 2/3 jacketed tilting steam kettle; Kettles mounted on trunnions connected to the control and gear consoles; Requires a 120 volt, 60 Hz, 1 phase power supply, 3.0 amp. 6' cord and plug supplied.

• 100,000 BTU/hr., 40 gallon capacity.
• 40 Gallon 2/3 Jacketed Gas Tilting Kettle
• Faucet bracket 90" left of draw-off valve
• Perforated strainer
• 2" compression draw-off valve
• Hinged cover
• Self generating gas fired power burner, all welded type 316 stainless steel, 2/3 jacketed tilting steam kettle.
• Fully welded hemispheric bottom kettle with type 316 stainless steel jacket and liner
• Factory charged with chemically pure water, rust inhibitor, and anti-freeze for protection against freezing to -30°F.
• Kettle exterior is fully insulated.
• Kettles mounted on trunnions connected to the control and gear consoles. The worm gear tilting mechanism is self locking and allows the kettle to tilt a full 90°. Trunnion cover with provision for faucet.
• Recessed control panel located on front of kettle. Controls include direct immersion thermostat, water sight glass, cooking light, pressure gauge and electronic ignition with ignitions indicator light.
• Safety features include low water cut-off, pressure relief valve, pressure switch and gas shut-off valve.
• Requires a 120 volt, 60 Hz, 1 phase power supply, 3.0 amp. 6' cord and plug supplied.
• 3/4" rear gas connection with gas pressure regulator.